Fixtures and jigs, let's see em please.

[chiefmurph]

I figurered i would post this in the interest of making a search easier. Any home made tools, fixtures or jigs to assist in plug building.

Please let's not turn this into a long thread that is not germane to this topic.

my spinner and paint booth work in progress.

What do you say folks?


thanks,
chiefmurph

[chiefmurph]

let's see them please?

[T_i_G_e_R]

Plug dryer.. right out of the box.. home depot.. screw it onto a 4x4 dries 8 plugs (or chickens) at a time

[kones]

Originally Posted by T_i_G_e_R

Plug dryer.. right out of the box.. home depot.. screw it onto a 4x4 dries 8 plugs (or chickens) at a time

nice.im starting my second season building & see the need for a spinner as ill be trying etex instead of diamond coat.i guess all clearcoats have some unique problems,the diamondcoat is humidity sensative & didnt seem as hard or tough as the plugs i have with etex finish but that could also be my fault as ive only made a dozen fishable plugs.this site has helped in many ways & i return often for inspiration & guidance.thanks to all who post to help & for this site.this site & the knowledge herein is absolutely priceless.

[Muskyslayer96]

Here is the drying case I made last spring, i just modified it this weekend with bearings to keep the threaded rod from walking on me. Still a work in progress, can get the temp from ambient to 120 degrees. Just wish I had better motors that didn't require balance

MS

[Dirk Gently]

Originally Posted by chiefmurph

I figurered i would post this in the interest of making a search easier. Any home made tools, fixtures or jigs to assist in plug building.

Please let's not turn this into a long thread that is not germane to this topic.

my spinner and paint booth work in progress.

What do you say folks?


thanks,
chiefmurph

Looks very nice. What kind of fans are you using for the spray booth?

[Roccus]

Originally Posted by Muskyslayer96

Here is the drying case I made last spring, i just modified it this weekend with bearings to keep the threaded rod from walking on me. Still a work in progress, can get the temp from ambient to 120 degrees. Just wish I had better motors that didn't require balance

MS

Welcome Musky slayer... you know me elsewhere as Rockfish9

[Muskyslayer96]

Thanks Roccus great site here!

MS

[BigWoodLures]

Nice work on the boxes guys. And love the simplicity of the rotisserie idea...