Stripers247.com Forums - View Single Post - Homemade lathe...
View Single Post
  #1  
Old 01-18-2006, 10:25 AM
Roccus's Avatar
Roccus Roccus is offline
King of Eels
Pro Staff
 
Join Date: Feb 2005
Location: Reading, Mass/Rings Island
Posts: 4,227
Default Homemade lathe...

OK as promised I'll give some photo's of my homemade plug lathe/rod wrapper, she's not pretty but it will get the job done until you get a "real" lathe...

the bed is 3/4" plywood, the fixed rail is 3/4" maple (pine will do) the headstock is 3/4 maple and the removable tail stock is 2" pine witha length of 3/8" threaded rod ground to a point, a pair of wing nuts lock it in the posistion you want...

power comes from an 3/4" variable speed drill....

the three shots show the beggining of the process, once the stock is sized the the largest diameter you will turn a line is drwn down and a template is tacked to the bed, the template is drawn on 1/4" plywood




Reply With Quote