Striped Bass Fishing Forums Forum banner

Attention All Sriper Ho,s.

4K views 14 replies 9 participants last post by  JakeF 
#1 ·
IM DEVELOPING A LARGE AMOUNT OF SWIMBAITS. ( hard and soft ).

i know theres swimbait tackle boxes out there, but i dont see what i want.
i came up with an idea of making one.
THE QUESTION IS, were do i start.

i have swim baits from 12in to 4in.
ANY ONE HAVE AN IDEA OR HAVE MADE ONE.:icon_stirthepot:

if you can show some pictures , that would help me out. THANKS.


HERE ARE SOME PICTURES TO GIVE YOU AN IDEA ON WHAT I NEED.
 

Attachments

See less See more
10
#6 ·
what i was thinking of, SOMTHING TO HANG THE NOSE UP.

I WAS AT WALMART TODAY, i saw a plastic container with a lid and handle for 8.00 bucks.

i did start to sea ideas on how to/ what to/ were to . lol

i figuerd some one on here might be or have a better idea.
i looked at the planos and i didnt see what im looking for.
do you have a part no# , or can you guide me to the right direction?
 
#7 ·
Do Do I dont know if this is what your looking for but look at the inserts on the hanging bait boxes by flambeau. Both hard and soft bags.

Flambeau

You might be able to craft something on their verticle design.
 
#13 ·
Maybe a googan idea, but a 10 buck Walmart bag and some 2x3 inch plastic gutter looks like this. The gutter is cut on a chop saw to just under 10 inches so you can get 12 pieces from a 10 foot length. Cut slow because the gutter will chip if you go busting through it. You could use a hacksaw if you don't have a chop saw.

View attachment 4627

View attachment 4628
i know what i will be doing with my 2 shimano bags tomorrow. BRILLIANT. Thanks:yourock:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top